NeuroTrac® MyoPlus 2 Pro

Regular price $1,795.00

or 4 interest-free payments of $448.75 with

SKU: MYO220P
2 in stock

The NeuroTrac® MyoPlus 2 Pro combines two-channel EMG biofeedback and EMG-triggered stimulation (ETS) with two channels of neuromuscular stimulation. Designed for clinics, rehabilitation centres and supervised home therapy, it supports pelvic floor rehabilitation, incontinence treatment, pain management and neuromuscular rehabilitation.

 

Tracked delivery
Every order tracked, no exceptions
Discreet packaging
Private, secure delivery every time
Physiotherapist-approved
Every product reviewed before we stock it
Product details

The NeuroTrac® MyoPlus 2 Pro combines two-channel EMG biofeedback and EMG-triggered stimulation (ETS) with two channels of neuromuscular stimulation. Designed for clinics, rehabilitation centres and supervised home therapy, it supports pelvic floor rehabilitation, incontinence treatment, pain management and neuromuscular rehabilitation.

 

Technical specifications

Model: MYO220P

EMG (biofeedback)
Dual channel EMG
EMG Range: 0.2 to 2000 μV RMS (continuous)
Sensitivity: 0.1 μV RMS
Accuracy: 4% of μV reading +/-0.3 μV at 200 Hz
Selectable Bandpass filter – 3db Bandwidth,
a. Wide: 18 Hz +/- 4 Hz to 370 Hz +/- 10% – Reading below 235 microvolts 10 Hz +/-3 Hz to 370 Hz +/- 10% – Reading above 235 microvolts
b. Narrow: 100 Hz +/- 5% to 370 Hz +/- 10%
Notch filter: 50 Hz (Canada 60Hz) – 33 dbs (0. 1% accuracy)
Common Mode Rejection Ratio: 130 dbs Minimum @ 50 Hz
Work / Rest periods: 2-99 seconds
Number of Trials: 2-99

STIM (neuromuscular stimulation)
Dual channel Stimulator
Amplitude: 0-90 mA into 500 Ohm load – actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 75 mA, at 1500 Ohms load the maximum will be limited to 50 mA.
Type: Constant current, maximum output voltage 70 Volts +5 / -10 Volts
Waveform: Symmetrical, rectangular,
bi-phasic with net zero DC current
Pulse width selection: 50-450 μS (2% accuracy)
Pulse rate selection: 2-100 Hz (2% accuracy)
Work / Rest periods: 2-99 seconds
Time 1 – 99 minutes
Ramp up time: 0.1 – 9.9 seconds
Preset and user programmable treatment Programs
Automatic output shut off with detection of open electrode above 0.5 mA

Power, dimensions and operating conditions
Battery: 4 x 1.5V AA. Low battery indication at 4.4 volts +/- 0.2 volts, automatic shut off when voltage drops below the low indication. Replace the batteries immediately! The device goes off automatically when not in use (energy saving): for example when in settings and no key pressed over 1 minute, when in stimulation mode (home screen) and all channels are 0mA.
Expected average battery set life [of standard 800 mAh, alkaline]:

MyoPlus 2: 12-16 hours in STIM, 25 hours in EMG mode.
MyoPlus 4: 8-16 hours in STIM, 25 hours in EMG mode.

Environmental Conditions for use: +5 to +40 degrees Centigrade. 15-90% Humidity.
Environmental conditions for storage & transport: -25 to +70 degrees Centigrade. 15-90% Humidity.
Physical dimensions: Length 150 mm, Width 89 mm, Depth 35 mm.
Weight: MyoPlus 2 device: 0.16 Kg (without batteries).


Packed shipping dimensions: 29 × 20 × 7 cm. Shipping weight: approximately 600 g.

Additional information

Key features

  • Features a full-colour touchscreen display.
  • The new user-friendly interface makes the Neurotrac MyoPlus 2 Pro self-explanatory, with interactive learning on the go, including electrode placement guidance, real-time EMG graphs, EMG biofeedback games, and templates.
  • Pre-set programmes for incontinence treatment, sports and muscular development, and neuromuscular rehabilitation.
  • 2-channel EMG (Biofeedback) combined with 2 channels of NMES (stimulation).
  • 2-channel ETS (EMG-triggered stimulation) with stimulation on 2 channels.
  • Simple single-phase or multiphase operation: multiphase allows EMG/ETS/STIM to be combined in one programme.
  • Multilingual LCD screen and voice prompts for biofeedback.
  • Manual and automatic threshold control.
  • EMG biofeedback between stimulation (muscle activity and tiredness indication when using muscle stimulation).
  • Bluetooth connectivity with up to 10 meters of wireless connection for NeuroTrac PC Software
  • Produces and prints the comprehensive patient progress reports on a day-to-day basis, providing average readings (2 channels) on work/rest, peak, onset and muscle release times, work and rest deviations and the average mA current.
  • Used as a learning tool for both patient and clinician with emphasis on improving treatment techniques in the use of EMG and neuromuscular stimulation.
  • Portable, light and user-friendly

How it works

EMG measures muscle activity in microvolts and provides visual and audio feedback during voluntary contraction and relaxation. In ETS mode, reaching the selected EMG threshold triggers stimulation to support muscle effort. Stimulation programmes offer adjustable frequency, pulse width, intensity, ramp times and work/rest cycles. Bluetooth connects the device to NeuroTrac PC software for session review and progress tracking.

Clinical applications

The clinical indications of the different modes of the NeuroTrac® MyoPlus 2 Pro devices are:

EMG

Pelvic pain

Patellofemoral pain syndrome

Rehabilitation after stroke, and paresis

NMES

Stress incontinence

Overactive bladder (urge incontinence)

Muscle atrophy

Upper limb rehabilitation in stroke

TENS

General pain (including back pain)

Pelvic pain

ETS

Urinary incontinence

Rehabilitation after stroke and paresis

It is also used for non medical purposes, including:

Pelvic floor work out

Pelvic floor strength, endurance, sensitivity, vascularisation and relaxation

Muscle growth

As a warm up prior to exercises

Active recovery

Muscle endurance

Muscle resistance

Muscle strength

Maximal strength

Explosive force

Fatigue resistance

Model number: MYO220P. This product is available through selected distributors who are able to provide training and support.

Frequently asked questions

What type of device is it?

NeuroTrac® MyoPlus 2 Pro is a dual-channel EMG biofeedback and neuromuscular stimulation device. It combines EMG (muscle activity monitoring), NMES (muscle stimulation), TENS (pain relief), and ETS (EMG-triggered stimulation) in one unit.

What conditions and therapy goals does it support?

The NeuroTrac® myoplus 2 pro supports pelvic floor rehabilitation (stress/urge incontinence), stroke rehab, muscle re-education, atrophy, patellofemoral pain, pelvic pain, and general pain management. It is also used for muscle strengthening, endurance, and functional training.

Who can use it?

It is designed for healthcare professionals in clinics and hospitals. It can also be prescribed for structured home use under clinical supervision, with lock and compliance monitoring features.

Can it be used alongside other treatments?

Yes. NeuroTrac® myoplus 2 pro is commonly combined with physiotherapy, pelvic floor exercises, stroke rehabilitation programs, and pain management plans, as advised by a clinician.

Are there safety precautions?

NeuroTrac® myoplus 2 pro should not be used by patients with demand-type pacemakers, during pregnancy (unless medically advised), or over the carotid sinus, chest/heart area, or broken skin. Clinical guidance is recommended.