Our products are all sent in discreet packaging.

Anuform anal and small intra-vaginal electrode

Anuform anal and small intra-vaginal electrode

Pelvic Floor Essentials by Sue Croft*

Pelvic Floor Essentials by Sue Croft*

Adhesive electrodes 30mm Diameter (round) 4pack

30mm round adhesive electrodes ideal for EAS traing with EMG or NMES, and any other small body areas

$7.20
Availability: In stock
SKU
VS30R

Adhesive electrodes 30mm Diameter (round) 4pack

  • Verity brand quality adhesive external electrodes 
  • Compatible with all electrical stimulation and EMG machines we supply
  • Ideal size for perianal use for electrical stimulation or EMG biofeedback
  • Single person use only

Applying the electrode

  • Ensure that the stimulation or EMG device is switched off prior to applying or removing the electrode, and disconnect the wire from the stimulation device.
  • Apply electrode only to unbroken skin. Clean the area where the electrode is to be applied with soap and water. Rinse and dry.
  • With the electrode still on the liner, attach the unattached lead wire from stimulation or EMG device to the electrode connector.
  • Remove the electrode from liner by gripping the edge of the electrode and peeling it gently off the liner. Keep the liner for storing the electrode after use.
  • DO NOT pull electrode from backing by the wire lead as you will damage it.
  • Place the electrode on the required location by applying the centre of the electrode first and smoothing down to the edges.
  • Finally, attach the lead wire to stimulation or EMG device.

Removal

  • Turn off the stimulation or EMG device and disconnect the lead wire from the device.
  • Remove the electrode from skin by peeling via electrode edge.
  • Place back on to liner.
  • DO NOT remove by pulling on the lead as you will damage it.

Re-Application and Storage

Between uses, return the electrode to the liner and store in the resealable bag in a cool dry place out of direct sunlight.

Electrode life / longevity

  • The life of the electrode varies depending on skin conditions, skin preparation, type of stimulation, how often it is used, storage, and climate.
  • For best results store adhesive electrodes in the fridge
  • If losing stickiness- apply a drop of water in middle of electrode and wipe it over surface, air dry and then use - it should regain some stickiness/adhesion
  • REPLACE if full surface of electrode won't stick to skin, or if it falls off easily during use.
  • ** The stimulation will only be emitted via the area if electrode that adheres to skin, if the full area is not adhered, the electrical current will be concentrated over a smaller surface area and may cause skin irritation.

View our video about electrodes where our physiotherapist Fiona explains how to choose and use an electrode 

 

Specifications
Specifications

Adhesive external electrodes (round ): 4 per pack

  • Soft white cloth backing, suitable for most areas of the body
  • High quality hydrogel and conductive carbon film
  • Water based gel makes it skin friendly and allergy free (exclusions possible)
  • Do not use alcohol wipes or other liquids to clean the front or gel side of the electrodes!
  • You can adda drop of water to regain some stickiness
  • Latex free
  • CE marked
Video

Adhesive external electrodes (round ): 4 per pack

  • Soft white cloth backing, suitable for most areas of the body
  • High quality hydrogel and conductive carbon film
  • Water based gel makes it skin friendly and allergy free (exclusions possible)
  • Do not use alcohol wipes or other liquids to clean the front or gel side of the electrodes!
  • You can adda drop of water to regain some stickiness
  • Latex free
  • CE marked