NeuroTrac® OBSTETRIC TENS

$278.50

or 4 interest-free payments of $69.63 with

SKU: NOBST

Click HERE for  contraindications and to see how electrical stimulation works.

Please note - whilst the manual states do not use in present of nitrous oxide, Verity Medical have assured us that it is safe for use with the nitrous oxide/oxygen mixtures used in labour today (such as Entonox).

Tracked delivery
Every order tracked, no exceptions
Discreet packaging
Private, secure delivery every time
Physiotherapist-approved
Every product reviewed before we stock it
View details
Product details

Click HERE for  contraindications and to see how electrical stimulation works.

Please note - whilst the manual states do not use in present of nitrous oxide, Verity Medical have assured us that it is safe for use with the nitrous oxide/oxygen mixtures used in labour today (such as Entonox).

  • Used for pain relief during labour
  • 1 Dedicated Labour Pain programme for ease of use
  • Remote Boost switch for additional pain control at times of intense pain ie during a contraction
  • Also useful for pelvic pain conditions such as endometriosis - the boost function can be used for painful cramps
  • Compact, light and reliable
  • Digital Dual Channel Obstetrics TENS unit
  • No known side effects for mother or baby

 

What is included?

  • Obstetric TENS stimulation unit
  • 9V battery
  • 2 x lead wires ( connect electrodes to unit
  • 1 x remote switch ( to activate unit during use)
  • 1 set of 4 adhesive electrodes 100x50 mm
  • User manual
  • Soft carry/storage case

Warranty

2 Years
Technical specifications

TENS

  • Dual channel: individually isolated circuits.
  • Amplitude: 0-80 mA into 500 Ohm load ; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts.
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
  • Pulse width: 220μS [2% accuracy].
  • Pulse Rate: 90Hz (Continuous mode) [2% accuracy].
  • Mode: Continuous (Boost mode).
  • Burst mode: Bursts of 9 pulses [200 μS] at 150 Hz, repeating twice every second (Rest mode).
  • Ramp up Time: 0.8 seconds from Rest to Boost.
  • Time duration: continuous until switched off.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.

Physical dimensions: 108 x 62 x 23 mm.

Weight: 0.09KG without battery, 0.14KG with battery.

Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
-10 to +50 degrees Centigrade. 0-90% Humidity.
Additional information