Adhesive electrodes 50 x 50mm

Adhesive electrodes 50x50mm 4 pack

• Verity brand quality adhesive external electrodes 
• Compatible with all electrical stimulation and EMG machines we sell
• Ideal for sacral or tibial stimulation for urinary and faecal urgency
• Supplied size with TENS machines 

Applying the electrode

• Ensure that the stimulation device is switched off prior to applying or removing the electrode, and disconnect the wire from the stimulation device.
• Apply electrode only to unbroken skin. Clean the area where the electrode is to be applied with soap and water. Rinse and dry.
• With the electrode still on the liner, attach the unattached lead wire from stimulation device to the electrode connector.
• Remove the electrode from liner by gripping the edge of the electrode and peeling it off the liner. Keep the liner for storing the electrode after use.
• DO NOT pull electrode from backing by the wire lead you will damage it.
• Place the electrode on the requried location by applying the centre of the electrode first and smoothing down to the edges.
• Finally, attach the lead wire to stimulation device.

Removal

• Turn off the stimulation device and disconnect the lead wire from the device.
• Remove the electrode from skin by peeling from electrode edge.
• Place back on to liner.
• DO NOT remove by pulling on the lead as you will damage it.

Re-Application and Storage

Between uses, return the electrode to the liner and store in the resealable bag in a cool dry place out of direct sunlight.

Electrode life / longevity

• The life of the electrode varies depending on skin conditions, skin preparation, type of stimulation, storage, and climate.
• For best results store adhesive electrodes in the fridge
• If losing stickiness- apply a drop of water in middle of electrode and wipe it over surface, air dry and then use - it should regain some stickiness/adhesion
• REPLACE if full surface of electrode won't stick to skin, or if it falls off easily during use.

• ** The stimulation will only be emitted via the area if electrode that ahderes to skin, if the full area is not adhered, the electrical current will be concentrated over a smaller surface area and may cause skin irritation