Our products are all sent in discreet packaging.

Adhesive electrodes 50 x 50mm

Adhesive electrodes 50 x 50mm

Adhesive electrodes 40 x 90mm Pk of 4

Adhesive electrodes 40 x 90mm Pk of 4

Adhesive electrodes 40 x 40mm Pk of 4

Adhesive electrodes suitable for use with TENS machines for pain, urinary urgency (OAB) and faecal urgency.

$8.60
Availability: In stock
SKU
VS4040

Adhesive electrodes 40 x 40 mm 4 pack

  • Verity brand quality adhesive external electrodes 
  • Compatible with all electrical stimulation and EMG machines we sell
  • Ideal for sacral or tibial stimulation for urinary and faecal urgency as well as pain applications anywhere on the body

Applying the electrode

  • Ensure that the stimulation device is switched off prior to applying or removing the electrode, and disconnect the wire from the stimulation device.
  • Apply electrode only to unbroken skin. Clean the area where the electrode is to be applied with soap and water. Rinse and dry.
  • With the electrode still on the liner, attach the unattached lead wire from stimulation device to the electrode connector.
  • Remove the electrode from liner by gripping the edge of the electrode and peeling it off the liner. Keep the liner for storing the electrode after use.
  • DO NOT pull electrode from backing by the wire lead you will damage it.
  • Place the electrode on the required location by applying the centre of the electrode first and smoothing down to the edges.
  • Finally, attach the lead wire to stimulation device.

Removal

  • Turn off the stimulation device and disconnect the lead wire from the device.
  • Remove the electrode from skin by peeling from electrode edge.
  • Place back on to liner.
  • DO NOT remove by pulling on the lead as you will damage it.

Re-Application and Storage

Between uses, return the electrode to the liner and store in the resealable bag in a cool dry place out of direct sunlight.

Electrode life / longevity

  • The life of the electrode varies depending on skin conditions, skin preparation, type of stimulation, storage, and climate.
  • For best results store adhesive electrodes in the fridge
  • If losing stickiness- apply a drop of water in middle of electrode and wipe it over surface, air dry and then use - it should regain some stickiness/adhesion
  • REPLACE if full surface of electrode won't stick to skin, or if it falls off easily during use.
  • ** The stimulation will only be emitted via the area if electrode that adheres to skin, if the full area is not adhered, the electrical current will be concentrated over a smaller surface area and may cause skin irritation

View our video about electrodes where our physiotherapist Fiona explains how to choose and use an electrode 

Specifications
Specifications

Adhesive external electrodes (square): 4 per pack

  • Soft white cloth backing, suitable for most areas of the body
  • High quality hydrogel and conductive carbon film
  • Water based gel makes it skin friendly and allergy free (exclusions possible)
  • Do not use alcohol wipes or other liquids to clean the front or gel side of the electrodes!
  • Latex free
  • CE marked
Video

Related Posts

Adhesive external electrodes (square): 4 per pack

  • Soft white cloth backing, suitable for most areas of the body
  • High quality hydrogel and conductive carbon film
  • Water based gel makes it skin friendly and allergy free (exclusions possible)
  • Do not use alcohol wipes or other liquids to clean the front or gel side of the electrodes!
  • Latex free
  • CE marked

We found other products you might like!