Our products are all sent in discreet packaging.

NeuroTrac® Continence

NeuroTrac® Continence

NeuroTrac® Tens

NeuroTrac® Tens

NeuroTrac® PelviTone

TENS and NMES machine for pelvic floor conditions.
The PelviTone does not come with an electrode, but is compatible with all of the electrodes in our range, which can be viewed here 

Please note we cannot supply this product to US addresses , any orders will be refunded

$226.00
Availability: In stock
SKU
NPELV

NeuroTrac® Pelvitone can be used for a range of pelvic health conditions:

  • To strengthen pelvic floor muscles - use the  'stress' programs : PO3, PO4, or 'building up endurance' PO9
  • For bladder or bowel urgency - use the  'urge' or 'frequency/freq'  programs : PO2, PO5, or PO6
  • For pelvic pain - use the 'pelvic floor pain' program : PO1

    Not everyone will respond to the pre-set programs. Often setting an individualised custom program will give better results. See a pelvic floor physiotherapist for advice. These can be set in PC1, 2 or 3. 

Which electrode do I need?

  • Females can use with vaginal, anal or external electrodes (to be purchased separately)
  • Males can use with either anal or external electrodes (to be purchased separately)
  • Please note the unit is not supplied with an electrode  in order to allow you to choose the most suitable one from our electrode range 

Programs on the Pelvitone®

Programme: P01 Pelvic Floor Pain  3Hz, 150uS, 1 sec ramp, Work continuous, 20 min         

Programme: P02 Urge Incontinence  10Hz, 250Us, 1 sec ramp, WORK 5 sec REST 5 sec, 20 min

Programme: P03 Stress Incontinence 1  40Hz, 200uS, 1 sec ramp, WORK 6 sec REST 15 sec, 20min

Programme: P04 Stress Incontinence 2  30Hz, 200uS, 0.8 ramp, WORK 5 sec REST 8 sec, 20 min

Programme: P05 Frequency / Urge 1  10 Hz, 200uS, 1 sec ramp, WORK 5 sec REST 5 sec, 20min

Programme: P06 Frequency / Urge 2  10Hz, 200uS, 1 sec ramp, WORK Continuous, 15min

Programme: P07 Frequency / Urge 3  10Hz, 220uS, WORK continuous, 20min

Programme: P08 Lack of Sensitivity  3-40Hz sequentially 25 min

Programme: P09 Pelvic Floor Work Out  10-30Hz sequentially 45min

Programme: P10 Building up Endurance  20Hz, 250uS, 0.8 ramp, WORK 5 sec REST 5 sec, 20min

Programme: P11 Relaxing the Pelvic Muscles  2Hz, 220uS, 1.2sec ramp, WORK 6 sec REST 10 sec, 20 min

PC 1,2 or 3 : Customisable programs Choose from the following parameters - set your own program: 2-100Hz, 50-330uS, 1-99 min , work/rest 2-99 sec OR continuous can be used, 0.1 -9.9 ramp


Features

  • 11 built in programmes 
  • 3 customisable, work/rest  programmes which can be set for multi-phase programs
  • Records the average current used plus the time in use along with the ability to lock the unit.

Click here to download physiotherapy guidelines on how to use your NeuroTrac Pelvitone electrical stimulation machine. You will also receive a sheet with these instructions with your order.


What is included?

  • Pelvitone electrical stimulation unit
  • 9V Battery
  • 2 lead wires ( connects electrodes to unit)
  • User manual
  • Soft storage case

What is the difference between Pelvitone® and other machines?

  • The Pelvitone is the only electrical stimulation machine  we sell that allows you to set multi-phase programs within the custom programs.
  • It has a few extra pre-set programs than the other machines we sell, however extra programs can be set in the custom or memory sections of the other machines.
  • Has improved symmetrical wave form for deeper penetration of the pelvic muscles and smoother stimulation.

Troubleshooting questions answered here

Read more about how electrical stimulation works


DO NOT use electrical stimulation without first checking with your health professional if you have an IUD or pessary . CLICK HERE for a guide to contraindications and precautions.


Warranty 2 years

If used as a Hire device 12 months

Specifications
Specifications

WHAT IS INCLUDED?

  • Pelvitone electrical stimulation unit
  • 9V Battery
  • 2 lead wires ( connects electrodes to unit)
  • User manual
  • Soft storage case

 

STIMULATION

  • Dual channel: individually isolated circuits.
  • Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant current,
  • maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Symmetrical, rectangular bi-phasic with zero DC
  • current.
  • Selectable pulse width: 50 μS – 330 μS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 – 100 Hz
  • [2% accuracy].
  • Time duration of the treatment selectable: 1 minute to 90 minutes.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2
  • volts the battery symbol will flash on/off once every second.
  • Open Electrode Detect: If an open circuit is detected at the
  • output of channel A or B the output current will be reset at zero.
  • Ramp up time 0.1 - 9.9 seconds.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.


Physical dimensions: 134 x 69 x 29.7 mm.
Weight: 0.18 KG with battery.


Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
-10 to +50 degrees Centigrade. 0-90% Humidity.

Warranty

2 Years

Video

WHAT IS INCLUDED?

  • Pelvitone electrical stimulation unit
  • 9V Battery
  • 2 lead wires ( connects electrodes to unit)
  • User manual
  • Soft storage case

 

STIMULATION

  • Dual channel: individually isolated circuits.
  • Amplitude: 0-90 mA into 500 Ohm load; actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 86 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant current,
  • maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Symmetrical, rectangular bi-phasic with zero DC
  • current.
  • Selectable pulse width: 50 μS – 330 μS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 – 100 Hz
  • [2% accuracy].
  • Time duration of the treatment selectable: 1 minute to 90 minutes.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2
  • volts the battery symbol will flash on/off once every second.
  • Open Electrode Detect: If an open circuit is detected at the
  • output of channel A or B the output current will be reset at zero.
  • Ramp up time 0.1 - 9.9 seconds.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.


Physical dimensions: 134 x 69 x 29.7 mm.
Weight: 0.18 KG with battery.


Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
-10 to +50 degrees Centigrade. 0-90% Humidity.

Warranty

2 Years