NeuroTrac® Continence
Pelvic Floor Exercise > Neurotrac® Continence > Pelvic Floor Stimulation > TENS > NeuroTrac® Continence

NeuroTrac® Continence


Brand: Verity Code: ECS400




DO NOT use electrical stimulation without first checking with your health professional if you have an IUD or pessary, metal implants or clips such as Filshie clips used for tubal ligation. Click HERE for other contraindications and to see how electrical stimulation works.
US customers we cannot supply electrical stimulation machines to the US click here

NeuroTrac® Continence  Is a Digital Dual Channel STIM unit suitable for :

  • pelvic floor muscle strengthening
  • urinary and faecal incontinence
  • bladder frequency and urgency
  • lack of sensitivity of pelvic floor
  • pelvic floor workout - combining several phases and parameters
  • pain relief
  • muscle strength and endurance.

The NeuroTrac® Continence :

  •  9 built in programmes 
  • 3 customisable, work/rest  programmes which are simple to set up
  • records the average current used plus the time in use along with the ability to lock the unit.

These machines are widely used by physiotherapists in their practices and you can now bring the same technology to the privacy of your own home, in a simple, user-friendly  compact and reliable stimulation device. It is the best value of our home electrical stimulation units for the pelvic floor .

Choosing an electrode

The Continence does not come with an electrode, but is compatible with all of the electrodes in our range, which can be viewed here

What is included?

  • Continence electrical stimulation unit
  • 9V Battery
  • 2 lead wires ( connects electrodes to unit)
  • User manual
  • Soft storage case

The programmes for the NeuroTrac® Continence

  • Programme : P01 PAIN RELIEF 3Hz ,150 uS, 1 sec ramp, Cont WORK , 20 min
  • Programme : P02 URGE10Hz, 250uS, 1 sec Ramp, WORK 5 sec REST 5sec, 20 min
  • Programme : P03 STRESS 1 40Hz, 200uS, 1 sec Ramp, WORK 6 sec REST 15 sec, 20 min
  • Programme : P04 STRESS 2 30 Hz, 200uS, 0.8 sec ramp, WORK 5sec REST 8 sec, 20 min
  • Programme : P05 FREQ/URGE 1 10Hz, 200uS, 1 sec ramp, WORK 5sec REST 5sec, 20 min
  • Programme : P06 FREQ/URGE 2 10Hz, 200uS, 1 sec Ramp, CONT, 15 min
  • Programme : P07 LACK OF SENSITIVITY [25 MIN] Sequential 3-40Hz total time 25min
  • Programme : P08 PELVIC FLOOR WORK OUT [60 MIN] Sequential 3-40Hz total time 60 min
  • Programme : P09 BUILDING UP ENDURANCE 20Hz, 250uS, 0.8 Ramp, WORK 5sec REST 5sec, 20 min
  • CUSTOMISED : PC1,PC2, PC3   2-100Hz, 50-450uS, 1-90min program duration, 2-99 sec work/rest , 0.3 - 9.9 sec RAMP  

Troubleshooting questions answered here

Read more about the science behind electrical stimulation.

Women can use electrical stimulation with either anal, vaginal or external electrodes. Men can use electrical stimulation with anal or external electrodes. Please note the unit is not supplied with an electrode  in order to allow you to choose the most suitable one from our electrode range 

Click here to download expert physiotherapy advice on how to use your Neurotrac Continence machine.


2 Years


  • Continence electrical stimulation unit
  • 9V Battery
  • 2 lead wires ( connects electrodes to unit)
  • User manual
  • Soft storage case



  • Dual channel: individually isolated circuits.
  • Amplitude: 0 - 90 mA into 500 Ohm load; indication only. Actual mA will tend to be less than indicated due to electrode impedance: at 1000 Ohms load (Electrodes in poor condition) the maximum will be limited to 70 mA, at 1500 Ohms load the maximum will be limited to 65 mA.
  • Type: Constant Current, maximum output voltage 180 Volts +10 / -30 Volts
  • Waveform: Asymmetrical, rectangular bi-phasic with zero DC current.
  • Selectable pulse width: 50 μS - 450 μS [2% accuracy].
  • Pulse Rate selection: in the continuous mode 2 Hz - 100 Hz [2% accuracy].
  • Time duration of the treatment selectable: 1 minute to 90 minutes.
  • Low Battery Indicator: If the battery goes below 6.9 volts +/- 0.2 volts the battery symbol will flash on/off once every second.
  • Open Electrode Detect: If an open circuit is detected at the output of channel A or B the output current will be reset at zero.
  • Ramp up time 0.3 - 9.9 seconds.
  • If the battery voltage is below 6.6 (+/- 0.2) volts the unit will not turn on.

Physical dimensions: 119.2 x 69 x 28.7 mm

Weight: 0.07KG without battery, 0.1KG with battery.

Environmental Conditions for use:
+10 to +30 degrees Centigrade. 0-90% Humidity.

Environmental conditions for storage & transport:
10 to +50 degrees Centigrade. 0-90% Humidity.

Search form