Adhesive external electrodes (square): 4 per pack
|
|
AUD$15.50 (inc GST) |
|
| |
Adhesive external electrodes (small perineal butterfly): 4 electrode per pack |
|
|
|
Adhesive external electrodes (large spinal butterfly): 1 electrode per pack |
|
AUD$19.50 (inc GST) |
|
Electron II Conductive Gel 60g |
|
AUD$6.95 (inc GST) |
|
Verity brand quality adhesive external electrodes for all TENS and NMES applications.
Each square electrode is 50mm x 50mm, 4 electrodes in each pack.
Small perineal butterfly adhesive electrodes are 4 electrodes per pack.
Large spinal butterfly adhesive electrodes are 1 electrode per pack.
Use with the Pericalm either at the same time as, or instead of, a vaginal or anal electrode.
The Pericalm has three customisable programs, so it is easy to get added value from your purchase it by use it as a TENS unit (for pain relief etc.). Simply set up an appropriate program, or ask your physio to set one up for you, and use external electrodes.
Electron II Conductive Gel improves delivery of electrical stimulation making therapy more effective.
Instructions for reusable adhesive electrodes
Applying the electrode
- Ensure that the stimulation device is switched off prior to applying or removing the electrode, and disconnect the wire from the stimulation device.
- Apply electrode only to unbroken skin. Clean the area where the electrode is to be applied with soap and water. Rinse and dry.
- With the electrode still on the liner, attach the unattached lead wire from stimulation device to the electrode connector.
- Remove the electrode from liner by gripping the edge of the electrode and peeling it off the liner. Keep the liner for storing the electrode after use.
- Place the electrode on the exact skin location (should be determined by a medical professional) by applying the centre of the electrode first and smoothing down to the edges. Finally, attach the lead wire to stimulation device.
Removal
- Turn off the stimulation device and disconnect the lead wire from the device.
- Remove the electrode from skin by peeling from electrode edge. Place back on to liner.
Re-Application and Storage
- If the adhesive becomes over-saturated, allow the electrode to air-dry in a refrigerator with adhesive side up until gel regains its tackiness
- If the electrode gel appears dry, add a few drops of water to the electrode gel. Allow it to rest to tacky stage before applying to the skin.
- Between uses, return the electrode to the liner and store in the resealable bag in a cool dry place out of direct sunlight.
Electrode life / longevity
The life of the electrode varies depending on skin conditions, skin preparation, type of stimulation, storage, and climate.
|